Panasonic pick and place machine-SMT area-Panasonic Pick and Place Machine-Panasonic Pick and Place Machine | Panasonic Machine

No human work is required - Evolved M2M autonomous line
APC system and automatic recovery option

Human judgment is required - Concentrated control
Floor management system and remote operation option

Human work is required, Variations of operator skills are controlled -
Navigation/automated items
Feeder setup navigation, component supply navigation and automated items

Panasonic next generation mounting concept
“Smart manufacturing”

More line throughput, better quality and lower cost with fully automated mounting system floor

NPM-D3 SYSTEM

Model ID		NPM-DX
PCB dimensions (mm) *When the long spec. conveyor is selected	Single-lane mode	L 50 × W50 ~ L 510 × W 590
	Dual-lane mode	L 50 × W50 ~ L 510 × W 300
PCB exchange time *When the short spec. conveyor is selected		2.1 s ( L 275 mm or less) 4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications.
Electric source		3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA
Pneumatic source *1		Min.0.5 MPa、200 L /min (A.N.R.)
Dimensions (mm)		W 1 665 × D 2 5702 × H 1 4443
Mass		3 600 kg (Only for main body:This differs depending on the option configuration.)

Placement head		Lightweight 16-nozzle head V2 ( With 4 heads )	Lightweight 8-nozzle head ( With 4 heads )
Placement speed	Max. speed	184 800 cph (0.0195 s/ Square chip)	96 000 cph（0.0375 s/ Square chip）
	IPC9850 (1608)	130 000 cph*4	-
Placement accuracy（Cpk≧1）		±25 μm/Square chip	±25 μm/ Square chip ±40 μm/QFP □12 mm Under ±25 μm/QFP □12 mm to □32 mm
Component dimensions （mm）		0201 component56 / 03015 component5 0402 component5 to L 6 × W 6 × T 3	0402 component*5 to L 45 × W 45 or L 100 × W 40 × T 12
Component supply	Taping	Tape : 4*7 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm
		4*7 、8 mm tape：Max. 136
	Stick	Max. 16

*1 : Only for main body
*2 : Dimension D including feeder cart
*3 : Excluding the monitor, signal tower and ceiling fan cover.
*4 : It is the reference value of the tact time by the IPC9850 conformity.(The independent mode)
*5 : 0201/03015/0402 component requires a specific nozzle/tape feeder.
*6 : 0201 component placement is optional. (Under conditions specified by PFSC)
*7 : For 4 mm tape feeder, please contact our sales representative.
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.

NPM-DX